Shortlist

• Suitable for all pressures (up to 1500kPa)
• Available in chrome & PVD finishes
• 200mm reach
• 35mm quality European cartridge with anti-scald and flow limiter
• 360° swivel spout and aerator included
• Watermark certified
• Designed in NZ

• Suitable for all pressures (up to 1500kPa)
• Available in chrome & PVD finishes
• 120mm reach
• 35mm quality European cartridge
• Designed in NZ
• Watermark certified

• Suitable for mains pressure only
• Available in chrome & PVD finishes
• Single function pull out spray
• 35mm quality European cartridge with anti-scald and flow limiter
• 360° swivel spout
• 208mm reach
• Not for commercial use
  

• Suitable for all pressures
• Available in chrome and PVD finishes
• Includes venturi jets for optimal unequal pressure
• Proprietary Felton F5 cartridge with anti-scald and flow limiter
• W120 x H160mm faceplate
• Designed & assembled in NZ
• Watermark certified

• For all pressures
• 173mm reach from wall to centre of outlet
• ½ inch female thread
• Easy fit installation
• Pivoting straightener included
• Designed in NZ
• Watermark certified

• Suitable for all pressures
• Available in chrome & PVD finishes
• Single function handpiece
• Shower aperture - 54mm²
• 840mm slide rail (731mm c-c)
• 1.5m large bore EN1113 rated hose
• Watermark certified

WELs: Chrome:
            MP 3 Star | 8.5 L/min
            LP 4 Star | 7.0 L/min

            Black:
            MP 3 Star | 8.5 L/min
            LP 4 Star | 7.0 L/min

            Brushed Stainless Finish:
            MP 2 Star | 10.5 L/min
            LP 2 Star | 10.5 L/min

• Suitable for mains pressure only (up to 500kPa)
• 35mm quality European cartridge
• Available in chrome & PVD finishes
• Designed & assembled in NZ
• Watermark certified

• For mains (equal high) or equal low pressures (up to 1500kPa)
• Low cost economical mixer
• 40mm quality European cartridge
• Watermark certified

• Suitable for all pressures
• Available in chrome & PVD finishes
• 222mm reach (from wall to centre of outlet)
• 1/2 inch female thread
• 180° swivel spout
• Pivoting straightener included
• Designed in New Zealand
• Watermark certified

• For mains (equal high) or equal low pressures (up to 1500kPa)
• Low cost economical mixer
• 40mm quality European cartridge
• Watermark certified

• Suitable for mains pressure only (up to 500kPa)
• Available in chrome & PVD finishes
• 35mm quality European cartridge
• 200mm reach
• Suitable for left or right-handed installation
• Designed and assembled in NZ
• Watermark certified

• Suitable for all pressures
• Available in chrome & PVD finishes
• 267mm reach (from wall to centre of outlet)
• 1/2 inch female thread
• 180° swivel spout
• Pivoting straightener included
• Designed in New Zealand
• Watermark certified

• Suitable for all pressures
• Available in chrome & PVD finishes
• Single function handpiece
• Shower aperture 38mm²
• Supplied with Aerlux® jets for mains pressure situations
• 770mm slide rail (672mm c-c)
• 1.5m hose
• Watermark certified

 WELS: Chrome, Black & Brushed Stainless Finish:
            MP 2 Star | 10.0 L/min
            LP 2 Star | 9.5 L/min

• Suitable for all pressures
• Available in chrome & PVD finishes
• ½ inch female thread wall connection
• ½ inch male thread hose connection
• Lead-free 304 stainless steel

• Suitable for mains pressure only
• Available in chrome & PVD finishes
• Single function shower head
• Shower aperture: Rainhead 140mm² | Handpiece 38mm²
• Supplied with Aerlux® jets
• Brass shower column with brackets
• Top section pivotable
• Built in diverter to switch between rain head and handpiece
• Top entry G1/2 inch female inlet
• Watermark certified

WELs: MP 3 Star | 8.5 L/min Rain Head
           MP 2 Star | 9.5 L/min Handpiece

• Suitable for all pressures
• Shower aperture - 30mm²
• When fitting shower heads, elbows or diverter to standard BSP threads (15mm) as per pre 1986 mixers, thread tape is required to ensure a water tight seal
• Designed and made in NZ
• Watermark certified

• For all pressures (min 35kPa)
• Available in chrome & black
• Shower aperture - 89mm²
• 300 x 200mm stainless steel rainhead
• 450mm horizontal reach (from flange to outlet)
• 1/2 inch female thread
• Watermark certified